USD
EUR
- Description
- Payment Methods
- Shipping and Tracking
Authentic Ultroner Gather 22mm RDA/RDTA Rebuildable Dripping Tank Atomizer w/BF Pin 2ml
The RDA/RDTA comes disassembled with each part having it's own compartment and spares etc placed in a plastic tubular container.
Up top we have an Ultem 510 drip tip which fits to the flat top surface of the sleeve/top-cap. The Sleeve/top-cap is one piece for performance purposes but the Stabwood section is held in place by 2 notches and an o-ring so can be removed for cleaning purposes, made of Stainless steel with the mentioned gorgeous stabwood section towards the top gives the Gather quite a unique look. The sleeve has an airflow slot one side and some sort of writing (in signature form) the other in Silver. The colours of the stabwood section will be unique to each atty.
The deck comes pre-installed with a standard pin and to use the Gather as a standard RDA simply screw the base onto the 510 threading and the sleeve/top-cap get's used in the usual manner. To use as an RDA with BF pin simply unscrew the standard pin using the larger supplied hexagonal wrench and screw the BF pin in it's place.
If you want to use the Gather as a standard RDTA before screwing the base disc in place you need to screw the extension pipe onto the 510 threading which gives you some length of pipe and then new 510 threading. Now place the Ultem tube in place and screw the base disc over the threading, o-rings both secures and seals the Ultem tube section.
Parameter
Diameter: 22mm
Height: 35mm
Capacity: 2ml
Weight 120g
Features
Materials: Stainless Steel/Ultem/Stabwood
Single Coil
RDA/RDTA Modes
Standard or BF Modes (both RDA/RDTA)
Filling Valve Top-Fill on deck/BF pin
One Sided Airflow
Airflow: Bottom/Lower Side by use of Inserts
Thread: 510
High End Build Quality
Gorgeous Stabwood section (unique to each atty)
Aesthetically pleasing (subjective)
Matching Ultem tube and drip tip
Both a high standard RDA and RDTA
Included standard and BF pins + extensions
RDA and RDTA can both be used with standard or BF pins
Worked great with BF pin as both RDA and RDTA
Can be converted from RDA to RDTA with ease
Very easy build
Fantastic quality Grub Screws
Great performing fill valve (quick and mess free)
3 Ultem Inserts giving very different draws
Inserts can be swapped on the fly
Locking sleeve/top-cap
Smooth airflow
Package Included
1* Gather Deck with Standard Pin
1* Spare O-ring set
2* Spare post screw
1* RDA bottom feed 510 pin
1* RDTA bottom feed 510 pin
3* Airflow inserts
2* Screwdriver
The RDA/RDTA comes disassembled with each part having it's own compartment and spares etc placed in a plastic tubular container.
Up top we have an Ultem 510 drip tip which fits to the flat top surface of the sleeve/top-cap. The Sleeve/top-cap is one piece for performance purposes but the Stabwood section is held in place by 2 notches and an o-ring so can be removed for cleaning purposes, made of Stainless steel with the mentioned gorgeous stabwood section towards the top gives the Gather quite a unique look. The sleeve has an airflow slot one side and some sort of writing (in signature form) the other in Silver. The colours of the stabwood section will be unique to each atty.
The deck comes pre-installed with a standard pin and to use the Gather as a standard RDA simply screw the base onto the 510 threading and the sleeve/top-cap get's used in the usual manner. To use as an RDA with BF pin simply unscrew the standard pin using the larger supplied hexagonal wrench and screw the BF pin in it's place.
If you want to use the Gather as a standard RDTA before screwing the base disc in place you need to screw the extension pipe onto the 510 threading which gives you some length of pipe and then new 510 threading. Now place the Ultem tube in place and screw the base disc over the threading, o-rings both secures and seals the Ultem tube section.
Parameter
Diameter: 22mm
Height: 35mm
Capacity: 2ml
Weight 120g
Features
Materials: Stainless Steel/Ultem/Stabwood
Single Coil
RDA/RDTA Modes
Standard or BF Modes (both RDA/RDTA)
Filling Valve Top-Fill on deck/BF pin
One Sided Airflow
Airflow: Bottom/Lower Side by use of Inserts
Thread: 510
High End Build Quality
Gorgeous Stabwood section (unique to each atty)
Aesthetically pleasing (subjective)
Matching Ultem tube and drip tip
Both a high standard RDA and RDTA
Included standard and BF pins + extensions
RDA and RDTA can both be used with standard or BF pins
Worked great with BF pin as both RDA and RDTA
Can be converted from RDA to RDTA with ease
Very easy build
Fantastic quality Grub Screws
Great performing fill valve (quick and mess free)
3 Ultem Inserts giving very different draws
Inserts can be swapped on the fly
Locking sleeve/top-cap
Smooth airflow
Package Included
1* Gather Deck with Standard Pin
1* Spare O-ring set
2* Spare post screw
1* RDA bottom feed 510 pin
1* RDTA bottom feed 510 pin
3* Airflow inserts
2* Screwdriver
Product reviews can be carried out after the member login, please click here to login
You May Like
-
$45.99
-
$21.99
-
$24.99
-
$22.99
-
$46.99
-
$46.99
-
$46.99
-
$46.99
-
$36.99
