Authentic Auguse MTL 22mm RTA Rebuildable Tank Atomizer Kit 4ml
Parameter
Diameter 22mm
Height 36.8mm
Capacity 4ml
Weight 82g
Features
510 gold plated brass pin;
22mm diameter;
Single coil build deck;
Side coil locking;
Liquid control;
5 different adjustable airflow screws (0.8、1.0、1.2、1.5、2.0mm)
Package Included
1* Authentic Auguse MTL 22mm RTA Rebuildable Tank Atomizer 4ml (PEI tank pre-installed)
1* Acrylic Replacement Tank
1* SS+ Acrylic Replacement Tank
4* Different Airflow Screws (1 is pre-installed)
1* Accessory Bag
2Fdeal securely accepts the following payment methods
For PayPal offline, Please contact our customer service specialists for instructions.
Credit Card (Accepts Visa, MasterCard, JCB)
Giropay (For Germany)
Giropay is currently only for customers in Germany.
Giropay is an online payment method offered by over 1,500 banks and savings banks. Based on online banking with PIN and TAN, it allows payment via online transfer - and this is easy, fast and secure. For payment with Giropay, you only need an online banking account with a participating bank or savings bank. The merchant will receive a payment guarantee from the bank of the buyer immediately after successful payment and can thus directly send you goods or services.
Sorfot Banking (For Austria, Belgium, Germany, Italy, Netherlands, Poland, Spain, Switzerland)
2Fdeal accepts payments through SOFORT Banking, a European-wide payment method available in 8 countries (Austria, Belgium, Germany, Italy, Netherlands, Poland, Spain and Switzerland). You will pay for successful transactions quickly and easily.
Webmoney (For Russia, Germany)
WebMoney is an online payment settlement system established in Russia in 1998.It is one of the largest electronic payments processors in Russia by number of users, with the company reporting 41 million registered accounts and 300,000 active weekly users in early 2020,[ and 100,000 stores accepting payments via the system.
PayU (For Czech Republic)
PayU is a fintech company that provides payment technology to online merchants. The company was founded in 2002 and is headquartered in Hoofddorp, Netherlands. It allows online businesses to accept and process payments through payment methods that can be integrated with web and mobile applications.
iDeal (For Netherlands)
With iDEAL you can make online payments in a reliable, secure and easy way. Payments are done using the mobile banking app or the online banking environment of your own bank. iDEAL is a direct online transfer from your bank account to the bank account of an entrepreneur.
Eps (For Austria)
2Fdeal.com accepts customers to pay EUR through EPS payment method. It provides a simple and secure process of online payments to millions of users in Austria with payment guaranteed. With EPS, the processing currencies and settlement currency will be EUR.
Payment Features: all Austrian banks supported, refunds available(within one year), real-time transaction, easy operation.
Trading limit: 1 EUR to no limit
Bancontact (For Belgium)
Bancontact, formerly known as Mister Cash, is the most popular online payment method in Belgium. Using this online payment method is to be highly recommended. It lets customers make real-time card transactions to buy products and services. A Bancontact card with a PIN number is issued to customers who open a Belgian bank account. It’s linked to a customer’s current account and is accepted in most retail stores in Belgium.
EUR is only the acceptance currency and preferred currency if you use the Bancontact. Minimum amount for a single transaction is 1 EUR and there is no limit for maximum amount for a single transaction. No risk of dishonored payments. Support direct refunds and mobile payment. With 365 days of refunds limit.
OXXO (For Mexico)
OXXO allows customers to pay bills and online purchases in-store with cash. To complete a transaction, customers receive a voucher that includes a reference number for the transaction. Customers then bring their voucher to an OXXO store to make a cash payment.
Polipayment (For Australia, New Zealand)
POLi Payments Pty Ltd is an online payments company based in Melbourne, Australia. It is the developer and provider of POLi, an online payment system that is used by merchants and customers in Australia and New Zealand. POLi Payments has been acquired by SecurePay Holdings, a fully owned subsidiary of Australia Post.
The Auguse mtl 22mm rta and its accessories were sent to me by 2Fdeal in these two transparent plastic cases, the appearance of this packaging visually makes the "clone" effect a bit, in one there are the complete atom, in the other the acrylic tank and the acrylic mixed tank + SS with spare parts
Packages include
1 Auguse MTL 22mm RTA complete with Tank 4ml in PEI pre-installed.
1 spare acrylic tank
1 spare tank in SS + Acrylic
4 Different Under-Coil Nozzles (1 is pre-installed)
1 Spare Part's envelope
Features
Pin 510 in gold plated brass
Diameter 22 mm
Height 36.8 mm
Capacity 4 ml
Weight 82 g
Deck with single coil construction.
Lateral leg block
Liquid control
Five different sub-coil nozzles (0.8、1.0、1.2、1.5、2.0mm)
The choice of spare parts available on 2Fdeal is also very good: 2Fdeal - Premium Vape Store for Worldwide
The deck is completely removable for cleaning.
The gold plated brass Pin 510 on the bottom of the atom as we saw in the previous image allows us to open the deck simply by unscrewing it.
The under hole with no nozzle measures 3.5mm
For the calibration we have 5 different sub-coil nozzles (0.8、1.0、1.2、1.5、2.0mm) which are inserted and removed with a beaked pincer, are equipped with o'ring and guarantee an excellent seal with a precise adjustment without drafts.
The coils of the coil tighten laterally, this operation is relatively simple if you want to fix them with your legs on, (I like to fix them with your legs underneath) and here there is a little more trouble as between the upper edge of the tub and the lower end of the screws and their heads there is not much space unless you use a 30Ga wire, otherwise you need to unscrew them almost completely to recover the space to insert the wire.
As a length for the cotton I took as a reference the outer edge of the deck
The Anguse MTL RTA feeds very well so I didn't skimp in the quantity of cotton in its buttonholes.
Now with the regenerated deck we go to see how the chimney and its bell are made, this operation indicates how the tank is extracted (the atom has the refill from the bottom)
Here you can see the 2 sealing rings in the upper part of the fireplace and the laser-engraved logo on the outside of the bell.
The bell internally measures 13mm while it has a depth of 12, the dome has a conical profile up to the initial hole of the chimney with a diameter of 4mm.
Once the chimney is reinserted in the tank, we can make the refill from the bottom always keeping the tank upside down, then we can screw the deck, a discordant note is the surface of the deck completely smooth, I would have preferred a knurled solution to offer more grip to the fingers in phase of screwing / unscrewing.
With the 2 "full" acrylic and pei tanks I didn't have any problems, but with the tank dismantled (acrylic + SS), especially in the unscrewing phase, it often happens that you unscrew the tank in its junction and not the deck.
In this image we can see the airflow loop (fixed), the surface of the smooth deck and a small air bubble that comes out of the liquid supply channels of the coil.
This image shows in detail the operation of liquid adjustment, an option that I consider very useful, I usually keep it on a hole and not even completely open, as the Auguse feeds quite well.
The original Tip has a hole of about 3mm against the 4mm of the chimney and an error found on several other atoms and which favors the accumulation of condensation in this area, to avoid condensation and effect is not connected to it (usually step). although this is not the case, I replaced it with good results with one having the same diameter as the chimney.
Original Tip
Replacement Tip
Final Considerations
Before trying this Auguse MTL RTA already foreshadowed me and I liked its adjustment of the liquid as an idea, while I was quite skeptical about two other constructive choices; the Refill from below and the non-adjustable external airflow.
On these constructive choices I can now make some considerations:
- I found the regulation of the liquid in an RTA like this and I find it a very useful option, the Auguse of it feeds very well (almost too much), I therefore keep the adjustment positioned on a single hole and almost completely closed, without problems of dry.
- I like the refill from the bottom up as I did, but seeing the Auguse's exemplary and absolutely leak-free operation I think it takes a few more seconds for this operation, we all know that the refill from the bottom (when possible) is a real cure for having the tank almost watertight, remember the berserker? it was a must or almost the refill from below to limit the problems.
- The fixed and non-adjustable airflow is not a problem, because once you find the right size nozzle we're going to put under the coil all the work will do it very well the latter. I like that one from 1.5 and I alternate it with the 1.2 that I find a bit too contrasty (for my taste)
Regeneration
I did some tests and for my liquids (Twisted Royal Crown, T-Svapo Hazelnut, Pack al'o Caramel) I feel good with 5 coils of Ka1 27Ga on a 2.5mm tip, the 0.70Ω coil pushes it to about 18W, build this atom is not difficult if you choose to keep the leg up, but it is a little more challenging if you choose to lock it down due to the almost zero space between the heads of the screws and the upper edge of the tanks, while the first leg can be easily inserted between the head and the turret, for the second it is necessary to unscrew the screw almost completely to recover the space to make it pass and block it. (I like to keep them down despite this complication)
Pro
- Pleasant and simple aesthetics
-Precise adjustment of the pull and relative tightness
-Fluid and very smooth operation
- As an aromatic yield I found it at the level of the Precisio of BD vape.
- Absence of losses
-Price
Versus
- Slippery check to unscrew for the lower refill
-Tip not connected to the chimney
-Acrylic composite tank + SS which tends to unscrew in its joint
- Complicated side leg lock if you want to keep them down
In the end this Auguse MTL RTA with new drip-Tip has found its permanent home on my Pico Mega, I liked it enough so I would recommend it, it will certainly not be the top but it is part of those that work really well and is not little thing.
USD
EUR
